NSN 5306-00-228-3424
Externally Relieved Body Bolt
Between 5.052 inches and 5.072 inches fastener length, hexagon head style, 0.500 inches head height, width between flats: 1.500 inches .
Manufacturer part number 52103-1 for national stock number 5306002283424.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-228-3424.
-
MPN or Model
52103-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.966 inches -
Fastener Length
Between 5.052 inches and 5.072 inches -
Head Style
Hexagon -
Head Height
0.500 inches -
Width Between Flats
1.500 inches -
Shank Unthreaded Hole Diameter
0.134 inches first hole and 0.154 inches first hole -
First Diameter From Head
Between 0.999 inches and 1.000 inches -
Second Diameter From Head
Between 0.646 inches and 0.666 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 3.896 inches and 3.916 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 4.086 inches and 4.106 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
100000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.802 inches first hole and 4.822 inches first hole -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758, cond f4 military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-028-9387 MPN 8B615001-3Exhaust Pipe
- 1560-00-498-1701 MPN 8B388110-43Aircraft Window Panel
- 1560-00-589-4240 MPN 8B635012-31Aircraft Structural Component Support
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-228-3424 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
52103-1 | Hiller Aircraft Corporation |
52103-1 | Helicopter Parts Service Inc |