NSN 5306-00-234-4733
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 2.812 inches and 2.859 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46C26 for national stock number 5306002344733.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-234-4733.
-
MPN or Model
AN46C26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.671 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 2.812 inches and 2.859 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.116 inches first hole -
Overall Length
3.844 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
3.421 inches -
Distance From Threaded End To Shank Hole Center
2.610 inches first hole and 2.642 inches first hole -
Eye Outside Width
0.750 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-7395 MPN NAS1063A11-324Terminal Board Marker Strip
- 5940-01-381-7222 MPN NAS1063B101-120Terminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-005-8227 MPN MS35307-302Hexagon Head Cap Screw
- 5305-00-009-7703 MPN NAS1218-06E1Machine Screw
- 5305-00-074-1995 MPN NAS1081C04A10NSetscrew
- 5305-00-149-9951 MPN NAS334A31Close Tolerance Screw
- 5305-00-150-3583 MPN MS27039-8-12Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-234-4733 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46C26 | National Aerospace Standards |
AN46C26 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.