NSN 5306-00-240-7195
Close Tolerance Hex Head Bolt
Between 8.703 inches and 8.750 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number 6868673 for national stock number 5306002407195.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-240-7195.
-
MPN or Model
6868673
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.985 inches and 1.157 inches -
Fastener Length
Between 8.703 inches and 8.750 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-928-7278 MPN 6798091Test Adapter Kit
- 4920-01-057-5211 MPN 6897509Aircraft Maintenance Fixture
- 4820-01-065-3974 MPN 6880464Low Shift Signal Valve
- 4820-01-446-6559 MPN 23058174Check Valve
- 5305-00-883-5894 MPN 6784204Shoulder Screw
- 5306-01-245-9837 MPN 29541106Machine Bolt
- 5306-01-446-6470 MPN 23053640Clevis Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-240-7195 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6868673 | Allison Transmission, Inc. |
6868673 | Allison Transmission, Inc. |