NSN 5306-00-247-0809
Coaxial Connector
Between 1.458 inches and 1.505 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number 63451-7H14 for national stock number 5306002470809.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-247-0809.
-
MPN or Model
63451-7H14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 1.458 inches and 1.505 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
0.875 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ps 13107 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5414 MPN 20098-94C8Socket Head Cap Screw
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-324-8544 MPN 110179-4-10Close Tolerance Screw
- 5305-00-904-3417 MPN 56040-3-6Socket Head Cap Screw
- 5305-01-005-0465 MPN 38030-3F-10BSocket Head Cap Screw
- 5305-01-013-9599 MPN 73991H-7D25Close Tolerance Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-026-0836 MPN NAS1121-26HClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-247-0809 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
63451-7H14 | Sps Technologies, Llc |
63451-7H14 | Wesco Aircraft Hardware Corp. |