NSN 5306-00-250-5582
Close Tolerance Hex Head Bolt
Between 1.641 inches and 1.688 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173C15A for national stock number 5306002505582.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-250-5582.
-
MPN or Model
AN173C15A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.375 inches and 0.454 inches -
Fastener Length
Between 1.641 inches and 1.688 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.234 inches and 1.266 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-199-0333 MPN AN3102K12S4PElectrical Receptacle Connector
- 5935-00-201-5609 MPN AN3101A18-9PElectrical Plug Connector
- 5935-00-229-7306 MPN AN3106A28-5PElectrical Plug Connector
- 5930-00-327-4495 MPN SA1AARN1Altitude Lim Switch
- 5935-00-683-1621 MPN AN3108A28-22PElectrical Plug Connector
- 5305-00-054-6650 MPN AN515C6-4Machine Screw
- 5305-00-067-9844 MPN AN507-518-8Machine Screw
- 5305-00-080-0744 MPN AN500C4R4Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-250-5582 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173C15A | Aeronautical Standards Group |