NSN 5306-00-253-4169
Wheel Bolt
4.750 inches fastener length, double hexagon head style, 0.400 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number 12S1426-7 for national stock number 5306002534169.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-253-4169.
-
MPN or Model
12S1426-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.650 inches -
Fastener Length
4.750 inches -
Head Style
Double hexagon -
Head Height
0.400 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Thread Diameter
0.750 inches -
Grip Length
4.100 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Surface Finish
125.0 microinches -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-106-6875 MPN 12W6547-64Aircraft Fairing
- 1560-00-224-4101 MPN 12B13456-3Engine Door Strake
- 1680-00-420-3179 MPN 12C490-3Bell Crank
- 1560-00-435-3612 MPN 12T507-801Aircraft Access Cover
- 1560-00-437-9989 MPN 12W8885-804Translating Track Guide
- 1560-00-451-7015 MPN 12P9289-1Shroud Nutplate Assembly
- 1560-00-497-7532 MPN 12H1715-9Aircraft Fluid Manifold
- 1680-00-534-1796 MPN 12C1493-7Slipclutch Gearshaft
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-253-4169 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12S1426-7 | Lockheed Martin Corporation |