NSN 5306-00-259-1021
Wheel Bolt
Between 0.579 inches and 0.625 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number MS21095-4002 for national stock number 5306002591021.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-259-1021.
-
MPN or Model
MS21095-4002
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.510 inches -
Fastener Length
Between 0.579 inches and 0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-084-3957 MPN LK1174-2Close Tolerance Screw
- 5305-00-186-9234 MPN TS1352-02LL4PSocket Head Cap Screw
- 5935-00-008-4353 MPN MS27500E16A55SElectrical Plug Connector
- 5935-00-044-5979 MPN MS3140E27-50PElectrical Receptacle Connector
- 5935-00-079-4631 MPN MS3116J18-32SXElectrical Plug Connector
- 5975-00-152-1080 MPN MS75022-29Electrical Conduit Bend
- 5935-00-201-7972 MPN MS3106A16-10PElectrical Plug Connector
- 5935-00-258-8998 MPN MS3108B18-4PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-259-1021 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-4002 | Military Standards |
LK21095-4002 | Torkon Fastener Corp |