NSN 5306-00-260-7580
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.078 inches shoulder thickness, between 0.891 inches and 0.938 inches shank length, eye stock thickness: between 0.120 inches and 0.130 inches .
Manufacturer part number AN43-7 for national stock number 5306002607580.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-260-7580.
-
MPN or Model
AN43-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.453 inches and 0.500 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.078 inches -
Shank Length
Between 0.891 inches and 0.938 inches -
Eye Stock Thickness
Between 0.120 inches and 0.130 inches -
Shoulder Diameter
0.500 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Overall Length
1.656 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.374 inches -
Distance From Threaded End To Shank Hole Center
0.734 inches first hole and 0.766 inches first hole -
Eye Outside Width
0.500 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-893-9499 MPN 879410-00Nonprecision Nonwire Wound Variable Resistor
- 5305-00-067-9914 MPN 805161-00Socket Head Cap Screw
- 5940-00-833-5836 MPN NAS1063A3-703Terminal Board Marker Strip
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-005-8113 MPN MS18064-46Setscrew
- 5305-00-059-3657 MPN NASM51958-61Machine Screw
- 5305-00-059-3659 MPN MS51958-63Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-260-7580 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN43-7 | National Aerospace Standards |
807106-00 | Defense Reduction Agency |
AN43-7 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.