NSN 5306-00-263-7793
Shouldered Rivet Ring Bolt
About this product
Between 0.438 inches and 0.441 inches eye inside diameter, 0.125 inches shoulder thickness, between 1.453 inches and 1.500 inches shank length, eye stock thickness: between 0.308 inches and 0.318 inches .
Manufacturer part number AN48-13 for national stock number 5306002637793.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-263-7793.
-
MPN or Model
AN48-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.766 inches and 0.813 inches -
Eye Inside Diameter
Between 0.438 inches and 0.441 inches -
Shoulder Thickness
0.125 inches -
Shank Length
Between 1.453 inches and 1.500 inches -
Eye Stock Thickness
Between 0.308 inches and 0.318 inches -
Shoulder Diameter
1.000 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.106 inches first hole -
Overall Length
1.843 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
1.281 inches first hole and 1.328 inches first hole -
Eye Outside Width
1.000 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6041 MPN NAS1063A5-436Terminal Board Marker Strip
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-008-5893 MPN NAS1102E08-8PMachine Screw
- 5305-00-058-4020 MPN MS24694S122Machine Screw
- 5305-00-060-9741 MPN MS21295-53Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-263-7793 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN48-13 | National Aerospace Standards |
AN48-13 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.