NSN 5306-00-263-7796
Shouldered Rivet Ring Bolt
About this product
0.094 inches shoulder thickness, between 2.188 inches and 2.234 inches shank length, between 0.183 inches and 0.193 inches eye stock thickness, shoulder diameter: 0.750 inches .
Manufacturer part number AN46-21 for national stock number 5306002637796.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-263-7796.
-
MPN or Model
AN46-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.624 inches and 0.671 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 2.188 inches and 2.234 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.116 inches first hole -
Overall Length
3.219 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
1.984 inches first hole and 2.016 inches first hole -
Eye Outside Width
0.750 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-059-8463 MPN NAS1100C3-32Machine Screw
- 5305-00-163-6802 MPN NAS1121E15Close Tolerance Screw
- 5305-00-197-2398 MPN MS27039C1-31Machine Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
- 5305-00-225-6400 MPN MS24693-C3Machine Screw
- 5305-00-261-4291 MPN NAS1102-04-22Machine Screw
- 5305-00-269-4513 MPN MS24694S168Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-263-7796 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46-21 | National Aerospace Standards |
AN46-21 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.