NSN 5306-00-268-1543
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, 6.109 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44-60 for national stock number 5306002681543.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-268-1543.
-
MPN or Model
AN44-60
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
6.109 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.6250 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Overall Length
7.000 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Center Of Eye To Shank End
Between 6.778 inches and 6.784 inches -
Distance From Threaded End To Shank Hole Center
5.922 inches first hole -
Eye Outside Width
0.625 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-439-4144 MPN NAS1063A14-1JTerminal Board Marker Strip
- 5940-01-454-0311 MPN NAS1063A6-510ALTerminal Board Marker Strip
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-003-9211 MPN NAS1155V23Close Tolerance Screw
- 5305-00-007-2953 MPN NAS1743C02T12USocket Head Cap Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-115-6127 MPN MS21090-0409Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-268-1543 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-60 | National Aerospace Standards |
AN44-60 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.