NSN 5306-00-269-6161
Wheel Bolt
1.000 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: 0.625 inches .
Manufacturer part number 231687PC4 for national stock number 5306002696161.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-269-6161.
-
MPN or Model
231687PC4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.450 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
0.625 inches -
Shank Unthreaded Hole Diameter
0.094 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
0.550 inches -
Features Provided
Casehardened and finished head -
Thready Qty Per Inch (tpi)
16 -
Hardness Rating
40.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.850 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Material Specification
46-s-6 fscm 10001 mfr ref single material response -
Thread Series Designator
Unc
More from these suppliers
- 5985-00-014-2647 MPN 2322792Waveguide Adapter
- 4920-00-062-9694 MPN 58A122D2210Module Test Fixture
- 5985-00-073-3759 MPN 2269739Directional Coupler
- 5905-00-147-9006 MPN 2877115Precision Wire Wound Variable Resistor
- 5950-00-235-9443 MPN 297895PC7Electrical Coil
- 5940-00-408-2752 MPN 983800Terminal Board
- 5985-00-427-5189 MPN 2921987Coaxial Crystal Mixer
- 5950-00-462-4233 MPN 2184404Reactor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-269-6161 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |
231687PC4 | Navair And Navsea Managed |