NSN 5306-00-269-6554
Wheel Bolt
3.078 inches fastener length, hexagon head style, 0.469 inches head height, width between flats: 1.438 inches .
Manufacturer part number G155H14-27 for national stock number 5306002696554.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-269-6554.
-
MPN or Model
G155H14-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
3.078 inches -
Head Style
Hexagon -
Head Height
0.469 inches -
Width Between Flats
1.438 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
1.812 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
34.0 rockwell c and 39.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.780 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-001-3159 MPN GC801JL10-12S2Electrical Receptacle Connector
- 5935-00-024-0568 MPN GC825BU1Electrical Receptacle Connector
- 1680-00-115-2904 MPN 128AV30492-1Rel Electrical Assy
- 5985-00-144-8164 MPN 123SCAV5068-17Radio Frequency Transmission Line Section
- 5940-00-150-4318 MPN GT805BYLug Terminal
- 5935-00-162-9464 MPN GA800RH14-4Electrical Connector Backshell
- 1680-00-232-7914 MPN 1128AV43022-7Panel And Switches
- 1560-00-245-3288 MPN A51B18026-3Door Assembly
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-269-6554 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |
G155H14-27 | Northrop Grumman Systems Corporation |