NSN 5306-00-271-4720
Shouldered Rivet Ring Bolt
About this product
0.094 inches shoulder thickness, between 2.453 inches and 2.500 inches shank length, between 0.183 inches and 0.193 inches eye stock thickness, shoulder diameter: 0.625 inches .
Manufacturer part number AN44-23 for national stock number 5306002714720.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-271-4720.
-
MPN or Model
AN44-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.515 inches and 0.562 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 2.453 inches and 2.500 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.625 inches -
Shank Unthreaded Hole Diameter
0.066 inches and 0.086 inches first hole -
Overall Length
3.359 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
2.281 inches and 2.312 inches first hole -
Eye Outside Width
0.625 inches -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-052-6887 MPN MS35198-48Machine Screw
- 5305-00-069-5600 MPN MS51958-34Machine Screw
- 5305-00-088-9666 MPN MS24693-C51Machine Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
- 5305-00-165-8012 MPN NAS662C1-4Machine Screw
- 5305-00-177-5453 MPN NAS1216-04-10Machine Screw
- 5305-00-206-1270 MPN MS35214-11Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-271-4720 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-23 | National Aerospace Standards |
AN44-23 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.