NSN 5306-00-271-4789
Shouldered Rivet Ring Bolt
About this product
Between 0.313 inches and 0.316 inches eye inside diameter, 0.094 inches shoulder thickness, between 2.953 inches and 3.000 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN45-27 for national stock number 5306002714789.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-271-4789.
-
MPN or Model
AN45-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.562 inches -
Eye Inside Diameter
Between 0.313 inches and 0.316 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 2.953 inches and 3.000 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.688 inches -
Shank Unthreaded Hole Diameter
0.066 inches and 0.086 inches first hole -
Overall Length
3.954 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
2.781 inches and 2.812 inches first hole -
Eye Outside Width
0.688 inches -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-688-6002 MPN NAS707S3Stud Terminal
- 5940-00-833-5836 MPN NAS1063A2-801Terminal Board Marker Strip
- 5305-00-062-7255 MPN NAS1703-5RShoulder Screw
- 5305-00-068-0517 MPN MS35190-300Machine Screw
- 5305-00-068-5410 MPN MS16995-2Socket Head Cap Screw
- 5305-00-074-4518 MPN NAS1156-21Machine Screw
- 5305-00-082-1724 MPN MS27039-0820Machine Screw
- 5305-00-086-2457 MPN NAS1203-25Close Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-271-4789 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN45-27 | National Aerospace Standards |
AN45-27 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.