NSN 5306-00-271-4814
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 3.015 inches and 3.062 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42B30 for national stock number 5306002714814.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-271-4814.
-
MPN or Model
AN42B30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.391 inches and 0.437 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 3.015 inches and 3.062 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.437 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.080 inches first hole -
Overall Length
3.687 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
2.875 inches first hole and 2.907 inches first hole -
Eye Outside Width
0.437 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-2686 MPN NAS1063E3-551XTerminal Board Marker Strip
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-052-5954 MPN MS35198-105Machine Screw
- 5305-00-053-1076 MPN MS35199-31Machine Screw
- 5305-00-082-6791 MPN AN525D8R11Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-139-6753 MPN NASM82496Machine Screw
- 5305-00-151-6904 MPN MS3212-9Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-271-4814 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42B30 | National Aerospace Standards |
AN42B30 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.