NSN 5306-00-271-4821
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.703 inches and 0.750 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44-5 for national stock number 5306002714821.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-271-4821.
-
MPN or Model
AN44-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.562 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.703 inches and 0.750 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.625 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Overall Length
1.609 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Threaded End To Shank Hole Center
0.531 inches first hole and 0.562 inches first hole -
Eye Outside Width
0.625 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-004-5178 MPN NAS1100V3-7Machine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-008-2070 MPN NAS1133E12Close Tolerance Screw
- 5305-00-052-6917 MPN MS24629-50Tapping Screw
- 5305-00-065-0222 MPN NAS1189-06P4LSocket Head Cap Screw
- 5305-00-068-0543 MPN MS24678-11Socket Head Cap Screw
- 5305-00-156-2359 MPN MIL-S-7839Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-271-4821 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-5 | National Aerospace Standards |
AN44-5 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.