NSN 5306-00-272-5099
Wheel Bolt
5.000 inches fastener length, hexagon head style, 0.391 inches head height, width between flats: between 0.906 inches and 0.938 inches .
Manufacturer part number G13918200 for national stock number 5306002725099.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-272-5099.
-
MPN or Model
G13918200
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
5.000 inches -
Head Style
Hexagon -
Head Height
0.391 inches -
Width Between Flats
Between 0.906 inches and 0.938 inches -
Shank Unthreaded Hole Diameter
0.136 inches first hole -
Thread Diameter
0.625 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
11 -
Min. Tensile Strength (psi)
75000 pounds per square inch -
Hardness Rating
78.0 rockwell b and 94.0 rockwell b -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.375 inches first hole -
Material
Steel -
Material Specification
Mil-b-857 military specification single material response -
Surface Treatment
Zinc -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
B type and a class
More from these suppliers
- 4820-00-004-9037 MPN 2266776-3Plug Valve
- 4820-00-056-2476 MPN LD546675ITEM3Safety Relief Valve
- 5930-00-074-1427 MPN 2042463-5Switch Pressure
- 5930-00-074-1430 MPN 2042463PC1Switch Pressure
- 5950-00-101-2411 MPN 3018736"REV.B"Power Transformer
- 5940-00-159-0252 MPN 842960PC2Stud Terminal
- 5940-00-171-0421 MPN 299530PC2Terminal Board
- 5940-00-171-0660 MPN 654078PC1Terminal Board
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-272-5099 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G13918200 | Navair And Navsea Managed |
342954PC8 | Navair And Navsea Managed |