NSN 5306-00-274-0961
Wheel Bolt
Cone type point at thd end.
Manufacturer part number 8331859 for national stock number 5306002740961.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-274-0961.
-
MPN or Model
8331859
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
4.500 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.615 inches and 0.625 inches -
Head Height
0.375 inches -
Width Between Flats
0.375 inches -
Thread Diameter
0.438 inches -
Features Provided
Casehardened and unfinished head -
Nonstandard Thread Pitch Diameter
+0.4024/+0.4050 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
110000 pounds per square inch -
Hardness Rating
20.0 rockwell c and 28.0 rockwell c -
Material
Steel comp 2330 -
Material Specification
Sae assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-068-3870 MPN 11663285-1Electrical Plug Connector
- 5905-00-705-0990 MPN 7050990Composition Fixed Resistor
- 5930-00-884-4818 MPN 8681769Thermostatic Switch
- 4820-01-105-0773 MPN 12265703Air Vent Valve
- 5905-01-118-8668 MPN 12280257Wire Wound Fixed Resistor
- 5930-01-266-4592 MPN 12341638Tilt Switch
- 4820-01-309-6580 MPN 12358995Fluid Pressure Regulating Valve
- 5935-01-387-5973 MPN 12387129-7Electrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-274-0961 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8331859 | U S Army Tank Automotive Command |
1245B1 | Diamond Reo Truck Co |