NSN 5306-00-274-1553
Wheel Bolt
Sharp edge of head removed leaving 0.062 in. W; 0.224 in. Min 0.244 in. Max dia of shank; groove between shank and thd 0.079 in. W by 0.165 in. Dia.
Manufacturer part number 299704PC8 for national stock number 5306002741553.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-274-1553.
-
MPN or Model
299704PC8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093483 - Bolts, Nuts Or Screws, NOI Iron Or -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.866 inches -
Fastener Length
2.136 inches -
Head Diameter
Between 0.389 inches and 0.393 inches -
Thread Diameter
0.216 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Hardness Rating
30.0 rockwell c and 35.0 rockwell c -
Countersink Angle
45.0 degrees -
Material
Steel comp 4640 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Phosphate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-027-4598 MPN 59A5A116Electrical Components Tiedown Strap
- 5905-00-069-0618 MPN 2134500PC111Inductive Wire Wound Fixed Resistor
- 5940-00-103-0239 MPN 2437199Computer Terminal
- 5905-00-124-2073 MPN 2548591-84Wire Wound Fixed Resistor
- 5940-00-171-0450 MPN 280895PC3Terminal Board
- 5905-00-171-2072 MPN SW105-215Composition Fixed Resistor
- 5905-00-198-4414 MPN 589026-1Precision Wire Wound Variable Resistor
- 5940-00-229-9669 MPN SP80150Terminal Board
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-274-1553 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
299704PC8 | Navair And Navsea Managed |