NSN 5306-00-274-2540
Wheel Bolt
Unthreaded portion of shank 0.372 to 0.374 in. Dia.
Manufacturer part number 366905PC2 for national stock number 5306002742540.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-274-2540.
-
MPN or Model
366905PC2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.450 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
0.625 inches -
Shank Unthreaded Hole Diameter
0.094 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
0.550 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.850 inches first hole -
Material
Steel -
Material Specification
46-s-18 gr 6 fscm 10001 mfr ref single material response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-009-7522 MPN 2550955-45Switch Subassembly
- 5905-00-010-1301 MPN 2447331P1Precision Wire Wound Variable Resistor
- 5985-00-056-6799 MPN 2666450-1Radio Frequency Reflection Isolator
- 5930-00-076-5578 MPN 2470370Lever Switch
- 5935-00-088-5434 MPN 2539119-2Electrical Plug Connector
- 5935-00-164-9753 MPN 2460982-121Electrical Receptacle Connector
- 5935-00-169-7265 MPN 2495467-4Electrical Plug Connector
- 5940-00-193-0217 MPN 12Z400PC21Terminal Board
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-274-2540 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
366905PC2 | Naval Sea Systems Command |
366905PC2 | Navair And Navsea Managed |