NSN 5306-00-275-8371
Wheel Bolt
1.250 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.544 inches and 0.562 inches .
Manufacturer part number 511999PC2 for national stock number 5306002758371.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-275-8371.
-
MPN or Model
511999PC2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.544 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel -
Surface Treatment
Chromate zinc -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-010-1118 MPN 2048259-2Electrical Receptacle Connector
- 5930-00-045-9700 MPN 2212676P126Light Push Switch
- 5930-00-056-5038 MPN 2413160Switch Subassembly
- 5905-00-059-1355 MPN 1242243-300Inductive Wire Wound Fixed Resistor
- 5985-00-072-9655 MPN 2206338Waveguide Assembly
- 5940-00-155-7173 MPN 57A5A228-1Terminal Board
- 5985-00-163-3987 MPN 2187044Waveguide Adapter
- 5905-00-169-9453 MPN 2531417PC23Film Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-275-8371 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
511999PC2 | Navair And Navsea Managed |