NSN 5306-00-276-9922
Wheel Bolt
Point length min 0.140 in. And max 0.150 in; min 28.0 and max 30.0 degrees.
Manufacturer part number 9131M89P01 for national stock number 5306002769922.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-276-9922.
-
MPN or Model
9131M89P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.480 inches and 0.500 inches -
Fastener Length
Between 0.730 inches and 0.750 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.280 inches and 0.320 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
Between 0.360 inches and 0.380 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.230 inches and 0.270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Uns
More from these suppliers
- 5905-00-034-0643 MPN R984P3500Wire Wound Fixed Resistor
- 4920-00-425-7941 MPN 1C5190G01Aircraft Maintenance Fixture
- 4920-00-473-4567 MPN 21C619G1Aircraft Maintenance Fixture
- 5905-00-759-8924 MPN R983P1503AFilm Fixed Resistor
- 4920-01-003-4648 MPN 518D540P74Safety Chain Assy
- 4920-01-138-2344 MPN 3C3086P01Aircraft Maintenance Fixture
- 5945-01-336-6573 MPN 9469M75G01Interlock Control
- 5935-01-438-7205 MPN 1696M82Electrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-276-9922 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9131M89P01 | General Electric Company |