NSN 5306-00-280-3333
Coaxial Connector
Between 1.474 inches and 1.504 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number ST3M571-6D14 for national stock number 5306002803333.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-280-3333.
-
MPN or Model
ST3M571-6D14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.639 inches -
Fastener Length
Between 1.474 inches and 1.504 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.251 inches first hole and 1.291 inches first hole -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2790 MPN LS15266V08-2Close Tolerance Screw
- 5305-01-454-0974 MPN LD111-0046-2415Machine Screw
- 5305-01-477-5968 MPN 3M1170V4-18AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170C4-4AClose Tolerance Screw
- 5306-00-332-4479 MPN VAL23033-4-26Close Tolerance Bolt
- 5306-00-883-9244 MPN MS21250-06036Shear Bolt
- 5306-01-045-4194 MPN VAL23608-4-13Shoulder Bolt
- 5306-01-054-8390 MPN C7521L6-16Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-280-3333 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M571-6D14 | Boeing Company, The |
BM3326-6D14 | Huck International, Inc. |
S371-6D14 | Huck International, Inc. |
VS3060-6D14 | Arconic Global Fasteners & Rings, |
VAL23033-6D14 | Valley-todeco, Inc. |
AIC752-6D14 | Sps Technologies, Llc |
ST3M571-6D14 | Sps Technologies, Llc |
S11-1059-6D14 | Sonic Industries Inc. |
74328-6D14 | Sps Technologies, Llc |
MB84-6D14 | Hi-shear Corporation |
ST3M571-6D14 | J M Precision Inc |
ST3M571-6D14 | Huck International, Inc. |
ST3M571-6D14 | Sps Technologies, Llc |
ST3M571-6D14 | Alcoa Global Fasteners, Inc. |
MB84-6D14 | Lisi Aerospace Canada Corp |
BM3326-6D14 | Huck Intl Inc |
S371-6D14 | Huck Intl Inc |
ST3M571-6D14 | Deutsch Fastener Corp |
VS3060-6D14 | Alcoa Global Fasteners, Inc. |