NSN 5306-00-281-7728
Close Tolerance Hex Head Bolt
Retaining element in shank.
Manufacturer part number 106467-4-62 for national stock number 5306002817728.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-281-7728.
-
MPN or Model
106467-4-62
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.402 inches and 0.438 inches -
Fastener Length
Between 4.293 inches and 4.313 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 3.875 inches and 3.891 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.193 inches first hole and 4.223 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 304l or steel comp 4140 or steel comp 8740 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-072-5884 MPN CA28080-06-4PPanel Screw Assembly
- 5305-00-279-4411 MPN CA28080-4-18SPanel Screw Assembly
- 5305-00-342-0809 MPN CA2860B-12SKPanel Screw Assembly
- 5305-00-795-2637 MPN CA2899-5-15SPanel Screw Assembly
- 5306-00-415-6102 MPN CA4510-6-82Close Tolerance Bolt
- 5306-01-093-5105 MPN SS27576-4-16Machine Bolt
- 5935-01-080-8127 MPN NAS1599Electrical Receptacle Connector
- 5930-01-400-4025 MPN 2269-006Pressure Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-281-7728 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-62 | Sps Technologies, Llc |
AS194-4-62 | Avibank Mfg., Inc. |
MS27576-4-62 | National Aerospace Standards |
MS27576-4-62 | Military Standards |
CA4510-4-62 | Arconic Global Fasteners & Rings, |
CA4510-4-62 | Arconic Global Fasteners & Rings, |