NSN 5306-00-282-0041
Wheel Bolt
0.688 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number AN102009 for national stock number 5306002820041.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-282-0041.
-
MPN or Model
AN102009
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.688 inches -
Fastener Length
0.688 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Shank Unthreaded Hole Diameter
0.065 inches all holes and 0.072 inches all holes -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.578 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-144-5365 MPN 803830In Protecting Cover
- 4920-00-398-3118 MPN 806915Master Ro Protector
- 1680-00-858-0695 MPN A2-06116Drive Shaft Spacer
- 1680-00-875-6491 MPN A2-88840Top Housing Assy
- 1680-01-056-4769 MPN 180970-5Flap Sensor Assembly
- 5305-00-206-3457 MPN 2075D1Setscrew
- 5306-00-033-0368 MPN 170180Machine Bolt
- 5306-00-721-5796 MPN 45D34Machine Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-282-0041 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN102009 | Aeronautical Standards Group |
6D6 | Curtiss-wright Controls, Inc |