1-321-802-5889
Email Us

NSN 5306-00-282-0915

Close Tolerance Hex Head Bolt

About this product

1.031 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .

Manufacturer part number AN173C10 for national stock number 5306002820915.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-00-282-0915.

  • MPN or Model

    AN173C10

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.406 inches
  • Fastener Length
    1.031 inches
  • Head Style
    Hexagon
  • Head Height
    Between 0.109 inches and 0.141 inches
  • Width Between Flats
    Between 0.365 inches and 0.377 inches
  • Grip Diameter
    Between 0.1889 inches and 0.1894 inches
  • Shank Unthreaded Hole Diameter
    0.070 inches first hole
  • Thread Diameter
    0.190 inches
  • Grip Length
    0.625 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    125000 pounds per square inch
  • Hardness Rating
    26.0 rockwell c and 32.0 rockwell c
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    0.891 inches first hole
  • Surface Finish
    63.0 microinches bearing surface of head
  • Material
    Steel comp 431
  • Material Specification
    Mil-s-18732 military specification single material response
  • Surface Treatment
    Passivate
  • Thread Series Designator
    Unf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-00-282-0915 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306002820915

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AN173C10 Aeronautical Standards Group
B6812 Military Specifications
AN173C10 Allison Transmission, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.