NSN 5306-00-282-2681
Close Tolerance Hex Head Bolt
6.656 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174-65A for national stock number 5306002822681.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-282-2681.
-
MPN or Model
AN174-65A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
6.656 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
6.188 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4140 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-001-8507 MPN MILR94-5Nonprecision Nonwire Wound Variable Resistor
- 5905-00-004-6081 MPN RNC60H1300FPFilm Fixed Resistor
- 5905-00-006-5501 MPN RNC60J3240BMFilm Fixed Resistor
- 5905-00-006-6983 MPN RNC60K1872FPFilm Fixed Resistor
- 5905-00-007-3887 MPN MIL-R-39005/4Noninductive Wire Wound Fixed Resistor
- 5905-00-007-7557 MPN RNR55K2151FSFilm Fixed Resistor
- 5935-00-009-2951 MPN MILC81511-6Electrical Plug Connector
- 5905-00-043-4101 MPN MILR10509Film Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-282-2681 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174-65A | Aeronautical Standards Group |
B6812 | Military Specifications |