NSN 5306-00-282-3350
Wheel Bolt
Between 3.265 inches and 3.312 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN4C32 for national stock number 5306002823350.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-282-3350.
-
MPN or Model
AN4C32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 3.265 inches and 3.312 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 2.796 inches and 2.828 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.109 inches first hole and 3.141 inches first hole -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1362 MPN AN3108A18-12PElectrical Plug Connector
- 5935-00-199-2626 MPN AN3106A20-4PElectrical Plug Connector
- 5905-00-295-3039 MPN AN3155-25-11Nonprecision Wire Wound Variable Resistor
- 5945-00-503-5231 MPN AN3306-2Electromagnetic Relay
- 4820-00-529-3195 MPN AN6015-2Check Valve
- 5305-00-012-0459 MPN AN525D832R20Machine Screw
- 5305-00-022-7016 MPN AN505C2-8Machine Screw
- 5305-00-081-4295 MPN AN565DC1032H16Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-282-3350 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4C32 | Aeronautical Standards Group |
Stock Check
- NS: 1537
- NE: 634