NSN 5306-00-282-4111
Wheel Bolt
Between 3.516 inches and 3.562 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN4C34A for national stock number 5306002824111.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-282-4111.
-
MPN or Model
AN4C34A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.515 inches -
Fastener Length
Between 3.516 inches and 3.562 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 3.047 inches and 3.078 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-8364 MPN AN3106A12-5PElectrical Plug Connector
- 5305-00-151-2083 MPN AN507-448R5Machine Screw
- 5305-00-151-2926 MPN AN500-10-7Machine Screw
- 5305-00-151-3646 MPN AN520PB3R3Machine Screw
- 5305-00-167-3679 MPN AN510-10-32Machine Screw
- 5305-00-269-4213 MPN AN509-506R23Machine Screw
- 5305-00-579-0093 MPN AN565DC8H2Setscrew
- 5305-00-721-7510 MPN AN565D428H14Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-282-4111 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4C34A | Aeronautical Standards Group |