NSN 5306-00-283-0192
Close Tolerance Hex Head Bolt
1/32 in. Radius on shank under head.
Manufacturer part number ME7930-4PC13C for national stock number 5306002830192.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-283-0192.
-
MPN or Model
ME7930-4PC13C
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
12.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
2.625 inches -
Head Style
Dee -
Head Diameter
0.750 inches -
Head Height
0.375 inches -
Distance From Centerline To Flat
0.281 inches -
Grip Diameter
Between 0.5000 inches and 0.5005 inches -
Shank Unthreaded Hole Diameter
0.125 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
240.0 brinell standard and 280.0 brinell standard -
Minimum Yield Strength
100000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.125 inches first hole -
Material
Steel comp 3135 -
Material Specification
Sae assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-333-9236 MPN HH12HC161Thermostatic Switch
- 5930-01-123-4196 MPN HH24CZ021Thermostatic Switch
- 5950-01-134-1482 MPN EF19XM230Coil
- 5905-01-134-3956 MPN HN68GA295Thermal Resistor
- 4820-01-278-6163 MPN 90C01-7141Globe Valve
- 5930-01-373-4994 MPN 90C02-2132 AP21-4059Pressure Switch
- 4820-01-386-1880 MPN 66U1-8552-3Angle Valve
- 5945-01-441-9699 MPN 62-10404-00 PG 3 ITEM 26Electromagnetic Relay
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-283-0192 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ME7930-4PC13C | Carrier Corporation |
ME7950-4PC13C | Carrier Corporation |
0ME112-4PC13C | Carrier Corporation |
0ME127-4PC13C | Carrier Corporation |
0ME145-4PC13C | Carrier Corporation |
2ME354-22PC59 | Carrier Corporation |
3ME465-4PC25C | Carrier Corporation |
3ME542-7PC25C | Carrier Corporation |
3ME542A205PC25C | Carrier Corporation |
7G5-3552 | Carrier Corporation |
9ME4-4PC13C | Carrier Corporation |
MR5857-101PC34 | Carrier Corporation |
MR5857-103PC34 | Carrier Corporation |
MR5857-128PC34 | Carrier Corporation |
MR7134-4PC13C | Carrier Corporation |
MR7135-4PC13C | Carrier Corporation |
MRA5300-101PC34 | Carrier Corporation |
MRA5300-103PC34 | Carrier Corporation |
MRA5300-1PC34 | Carrier Corporation |
MRA5300-3PC34 | Carrier Corporation |