NSN 5306-00-283-7471
Close Tolerance Hex Head Bolt
Between 2.307 inches and 2.337 inches fastener length, hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number NAS1263-28D for national stock number 5306002837471.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-283-7471.
-
MPN or Model
NAS1263-28D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.547 inches and 0.597 inches -
Fastener Length
Between 2.307 inches and 2.337 inches -
Head Style
Hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.7485 inches and 0.7490 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
16 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.019 inches first hole and 2.069 inches first hole -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard single material response -
Thread Series Designator
Unf -
Specification Data
80205-nas1263 professional/industrial association standard
More from these suppliers
- 5940-00-949-3167 MPN NAS1745-19Conductor Splice
- 5935-01-577-3543 MPN MS27488-20Electrical Connector End Seal Plug
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-018-7514 MPN NAS1220-5E10Machine Screw
- 5305-00-051-2328 MPN NASM51958Machine Screw
- 5305-00-051-2335 MPN MS51958-109Machine Screw
- 5305-00-058-4012 MPN NASM7839Machine Screw
- 5305-00-059-4572 MPN MS35190-46Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-283-7471 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1263-28D | National Aerospace Standards |