NSN 5306-00-283-7475
Wheel Bolt
Between 2.865 inches and 2.885 inches fastener length, hexagon head style, between 0.120 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R433P34U for national stock number 5306002837475.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-283-7475.
-
MPN or Model
R433P34U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.740 inches and 0.820 inches -
Fastener Length
Between 2.865 inches and 2.885 inches -
Head Style
Hexagon -
Head Height
Between 0.120 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.065 inches and 2.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Ams 5628 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
+50t7a, fscm 07482 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-016-9474 MPN 1C2838G2Hydraulic System Components Test Set
- 5905-00-104-8336 MPN 21C1714-7Composition Fixed Resistor
- 1560-00-251-6263 MPN 9667M77G06Thrust Reverser Fairing
- 4920-00-433-4510 MPN 21C3215G01Aircraft Maintenance Fixture
- 4920-00-566-0866 MPN 1C3864P1Stator Va Extension
- 4920-00-753-5295 MPN 21C1284G001Leakage Test Kit
- 4920-00-779-7656 MPN 21C934P10Aircraft Maintenance Fixture
- 4920-01-003-4621 MPN 1C2958P2Draglink Assy Plate
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-283-7475 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R433P34U | General Electric Company |