NSN 5306-00-285-5516
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, hexagon head style, between 0.178 inches and 0.198 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number AN101206 for national stock number 5306002855516.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-285-5516.
-
MPN or Model
AN101206
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.532 inches and 0.615 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Hexagon -
Head Height
Between 0.178 inches and 0.198 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-118-8336 MPN 1C2515P31Hole Attachment
- 4920-00-169-2792 MPN 1C6254G01Aircraft Engine Maintenance Machining Fixture
- 4920-00-571-8991 MPN 21C1285P010Hou Holding Fixture
- 5935-00-577-0091 MPN 21C1711-46Electrical Connector Cover
- 4920-00-944-8330 MPN 21C3030G001Maintenance Aircraft Repair Kit
- 4920-01-009-1429 MPN 1C5166G01Linear Holding Clamp
- 5935-01-293-4190 MPN 7007M21P15Electrical Receptacle Connector
- 4920-01-320-0146 MPN 3C3160P90Sump Closure Set Pad
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-285-5516 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN101206 | Aeronautical Standards Group |
21C1530-073 | General Electric Company |