NSN 5306-00-285-8020
Wheel Bolt
Between 3.115 inches and 3.135 inches fastener length, hexagon head style, between 0.209 inches and 0.229 inches head height, width between flats: between 0.555 inches and 0.564 inches .
Manufacturer part number 211087 for national stock number 5306002858020.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-285-8020.
-
MPN or Model
211087
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.695 inches -
Fastener Length
Between 3.115 inches and 3.135 inches -
Head Style
Hexagon -
Head Height
Between 0.209 inches and 0.229 inches -
Width Between Flats
Between 0.555 inches and 0.564 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.440 inches and 2.500 inches -
Features Provided
Finished head -
Nonstandard Thread Pitch Diameter
+0.3425/+0.3449 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
30.0 rockwell c and 38.0 rockwell c -
Material
Stainless steel -
Material Specification
Ams 5616 assn standard single material response -
Thread Series Designator
Uns
More from these suppliers
- 4920-00-070-9962 MPN PWA17518Aircraft Maintenance Fixture
- 4920-00-213-5288 MPN PWA51412Aircraft Engine Maintenance Fixture
- 4820-00-335-7689 MPN 235315P5R1Valve Seat
- 4920-00-340-2633 MPN PWA7811CFuel Control System Components Test Station
- 4820-00-348-8715 MPN 144355P5Valve Seat
- 4820-00-567-6445 MPN 235315P060Valve Seat
- 4920-00-883-3181 MPN PWA50994Module Support Stand Spacer
- 4920-00-908-9974 MPN PWA17741Combustion Cham Jaw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-285-8020 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
211087 | United Technologies Corporation |