NSN 5306-00-286-1481
Coaxial Connector
Between 2.953 inches and 3.000 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 464-4A42 for national stock number 5306002861481.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-286-1481.
-
MPN or Model
464-4A42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.328 inches and 0.375 inches -
Fastener Length
Between 2.953 inches and 3.000 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-929-7202 MPN NAS1196-10Electrica Connector
- 5985-01-192-2031 MPN 5035749-3Antenna Position Programmer
- 5940-01-428-6495 MPN NAS1063F1-6Terminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-008-9114 MPN NAS1190C02T6LSocket Head Cap Screw
- 5305-00-052-5950 MPN MS35198-9Machine Screw
- 5305-00-074-4436 MPN NAS623-5-6Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-286-1481 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
464-4A42 | National Aerospace Standards |