NSN 5306-00-291-5069
Wheel Bolt
3.125 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number MS9504-32 for national stock number 5306002915069.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-291-5069.
-
MPN or Model
MS9504-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.125 inches and 1.185 inches -
Fastener Length
3.125 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.940 inches and 2.000 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-7073 MPN MS3106F28-9PElectrical Plug Connector
- 5935-00-009-6400 MPN MS24266Electrical Plug Connector
- 5935-00-057-0097 MPN MS3102R12S3PXElectrical Receptacle Connector
- 5935-00-133-0377 MPN MS3132H12C50PElectrical Receptacle Connector
- 5940-00-143-4777 MPN 7418487P021Lug Terminal
- 5935-00-171-0137 MPN MS27474T18B53SElectrical Receptacle Connector
- 5935-00-242-2370 MPN MS3114H8C33PElectrical Receptacle Connector
- 4820-00-272-3347 MPN MS35785-4Drain Cock
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-291-5069 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9504-32 | Military Standards |