NSN 5306-00-292-5872
Close Tolerance Hex Head Bolt
Between 1.265 inches and 1.312 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174C12 for national stock number 5306002925872.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-292-5872.
-
MPN or Model
AN174C12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.437 inches and 0.516 inches -
Fastener Length
Between 1.265 inches and 1.312 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.796 inches and 0.828 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.124 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-001-6671 MPN NAS1221-06E2Machine Screw
- 5305-00-004-5184 MPN NAS1102-3-36Machine Screw
- 5305-00-052-8881 MPN MS24630-13Tapping Screw
- 5305-00-052-9802 MPN MS24694C50Machine Screw
- 5305-00-123-8492 MPN NAS514P832-40Machine Screw
- 5305-00-145-0831 MPN NAS1635-08-46Machine Screw
- 5305-00-357-1633 MPN NAS1351-6LE72PSocket Head Cap Screw
- 5305-00-470-1558 MPN NAS1100-06-6Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-292-5872 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174C12 | Aeronautical Standards Group |
10404862 | Nimikkeistokeskus Ncb Finland |
AN174C12 | National Aerospace Standards |
Stock Check
- NS: 156
- NE: 1149