NSN 5306-00-292-8538
Coaxial Connector
Between 0.703 inches and 0.750 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number NAS464-5A6 for national stock number 5306002928538.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-292-8538.
-
MPN or Model
NAS464-5A6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.328 inches and 0.375 inches -
Fastener Length
Between 0.703 inches and 0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Single Shear Strength
7300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-683-1628 MPN MS24523-22Toggle Switch
- 5940-01-425-6037 MPN NAS1063A5-432Terminal Board Marker Strip
- 4820-01-662-8443 MPN 65C26814-2Valve Cover Plate
- 5305-00-043-3642 MPN MS51964-37Setscrew
- 5305-00-068-5416 MPN MS16995-41Socket Head Cap Screw
- 5305-00-082-0580 MPN NAS1634-27Machine Screw
- 5305-00-118-3005 MPN AN565BC6H5Setscrew
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-292-8538 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-5A6 | National Aerospace Standards |