NSN 5306-00-292-8585
Coaxial Connector
3.281 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.438 inches .
Manufacturer part number NAS464-4A47 for national stock number 5306002928585.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-292-8585.
-
MPN or Model
NAS464-4A47
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.343 inches -
Fastener Length
3.281 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
2.938 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-111-4884 MPN NAS1666-22Electrical Connector Cable Clamp
- 5940-00-143-4771 MPN MS25036-103Lug Terminal
- 5305-00-060-4373 MPN NAS1633-23Machine Screw
- 5305-00-068-0506 MPN MS90726-6Hexagon Head Cap Screw
- 5305-00-071-2094 MPN MS51958-84Machine Screw
- 5305-00-143-3251 MPN NAS1352C5LN14Socket Head Cap Screw
- 5305-00-206-7824 MPN MILS7839Machine Screw
- 5305-00-225-7773 MPN MS16996-22Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-292-8585 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-4A47 | National Aerospace Standards |