NSN 5306-00-292-8591
Coaxial Connector
1.281 inches fastener length, hexagon head style, 0.070 inches head height, width between flats: 1.125 inches .
Manufacturer part number NAS464-3-15 for national stock number 5306002928591.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-292-8591.
-
MPN or Model
NAS464-3-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.343 inches -
Fastener Length
1.281 inches -
Head Style
Hexagon -
Head Height
0.070 inches -
Width Between Flats
1.125 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
2690 pounds per square inch -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.125 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-140-9596 MPN NAS1388-2Conductor Splice
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-007-1559 MPN NAS1100C04-16PMachine Screw
- 5305-00-051-6719 MPN MS3212-2Machine Screw
- 5305-00-069-2597 MPN MS35202-71Machine Screw
- 5305-00-099-7877 MPN NAS1351-5H16PSocket Head Cap Screw
- 5305-00-150-3474 MPN MS27039C1-21Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-292-8591 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-3-15 | National Aerospace Standards |