NSN 5306-00-298-2758
Coaxial Connector
Between 2.243 inches and 2.296 inches fastener length, hexagon head style, 0.312 inches head height, width between flats: 0.938 inches .
Manufacturer part number 2541121 for national stock number 5306002982758.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-298-2758.
-
MPN or Model
2541121
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.484 inches and 0.531 inches -
Fastener Length
Between 2.243 inches and 2.296 inches -
Head Style
Hexagon -
Head Height
0.312 inches -
Width Between Flats
0.938 inches -
Grip Diameter
Between 0.6234 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.125 inches first hole -
Material
Steel comp 4140 -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-046-5164 MPN 4445187-2Support Assy
- 1560-00-122-3110 MPN 5115202-20NLeft Ha Aileron Rib
- 1560-00-123-9254 MPN 2145750-5F Strainer Assembly
- 1560-00-182-6295 MPN 2209886Carburetor Ai Shaft
- 1560-00-606-9645 MPN 4660868Drum
- 1560-00-657-5409 MPN 5439735-525Contro Console Assy
- 1680-01-020-6982 MPN 4550854-511Ejection Seat Actuator Shaft
- 4820-01-103-3769 MPN 770800-1Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-298-2758 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2541121 | Boeing Company, The |