NSN 5306-00-298-4923
Wheel Bolt
1.844 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: 0.500 inches .
Manufacturer part number G155HH5-16 for national stock number 5306002984923.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-298-4923.
-
MPN or Model
G155HH5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
1.844 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.500 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
1.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
38.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.672 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 or steel comp e4340 -
Material Specification
Mil-s-6049 military specification 1st material response or an-qq-s-756 cancelled federal specification 2nd material response or aisi assn standard 1st material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-004-1438 MPN A51B24183-3Bleed Door Scoop
- 4820-00-004-9711 MPN A51H20683-11Valve Body
- 5940-00-053-1037 MPN 128AVP10175-1Terminal Board
- 1560-00-076-0490 MPN 121CS10020-3Aircraft Tip
- 1560-00-152-0958 MPN 89373-1Power Plant Air Duct Adapter
- 5935-00-158-4889 MPN GA800RW5Electrical Connector Backshell
- 4920-00-245-4119 MPN 105J890660-1Aircraft Maintenance Fixture
- 5905-00-357-3130 MPN GR816FK2Nonprecision Nonwire Wound Variable Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-298-4923 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G155HH5-16 | Northrop Grumman Systems Corporation |
G155HH5-16 | Northrop Grumman Systems Corporation |