NSN 5306-00-304-7933
Close Tolerance Hex Head Bolt
0.750 inches fastener length, round w/wrench flats head style, 0.580 inches head diameter, head height: 0.177 inches .
Manufacturer part number 1128LM40407-11 for national stock number 5306003047933.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-304-7933.
-
MPN or Model
1128LM40407-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
0.750 inches -
Head Style
Round w/wrench flats -
Head Diameter
0.580 inches -
Head Height
0.177 inches -
Width Between Flats
0.331 inches -
Grip Diameter
Between 0.310 inches and 0.311 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.631 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-1592 MPN 128EC60053-3Aircraft Thermal Insulation Pipe Covering
- 5935-00-009-6557 MPN GA800MS22-12Electrical Connector Backshell
- 1560-00-018-2335 MPN 128WM10198-2Wing Fitting
- 1560-00-047-1987 MPN 89TM1571-1Fitting Assembly
- 1560-00-075-0808 MPN 123BP10041-1Aircraft Fairing
- 1560-00-098-0982 MPN 89WM2112-1Fitting Assy
- 5940-00-113-8185 MPN GT805H18-8Lug Terminal
- 5985-00-172-6270 MPN 123SCAV5666-1Waveguide Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-304-7933 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1128LM40407-11 | Northrop Grumman Systems Corporation |
1128LM40407-11 | Northrop Grumman Systems Corporation |