NSN 5306-00-308-1530
Close Tolerance Hex Head Bolt
Retaining element in shank.
Manufacturer part number 106467-4-58 for national stock number 5306003081530.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-308-1530.
-
MPN or Model
106467-4-58
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 4.043 inches and 4.063 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 3.625 inches and 3.641 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.953 inches first hole and 4.963 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 316l or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 316l -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-094-6060 MPN CA2658-4-97Close Tolerance Screw
- 5305-01-490-3000 MPN CA22051-6T26-21Panel Screw Assembly
- 5940-01-444-8253 MPN NAS1063A9-141CTerminal Board Marker Strip
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5305-00-047-3146 MPN NAS1352-06-16PSocket Head Cap Screw
- 5305-00-057-0527 MPN NASM51958Machine Screw
- 5305-00-059-3673 MPN NAS1635-4-6Machine Screw
- 5305-00-068-5839 MPN MS24678-37CSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-308-1530 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-58 | Sps Technologies, Llc |
AS194-4-58 | Avibank Mfg., Inc. |
MS27576-4-58 | National Aerospace Standards |
MS27576-4-58 | Military Standards |
CA4510-4-58 | Arconic Global Fasteners & Rings, |