NSN 5306-00-309-1453
Externally Relieved Body Bolt
4.170 inches fastener length, hexagon head style, 0.090 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number 528034 for national stock number 5306003091453.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-00-309-1453.
-
MPN or Model
528034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.392 inches -
Fastener Length
4.170 inches -
Head Style
Hexagon -
Head Height
0.090 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
First Diameter From Head
0.460 inches -
Second Diameter From Head
Between 0.497 inches and 0.498 inches -
Third Diameter From Head
0.420 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.090 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
3.598 inches -
Distance From Largest Bearing Surface Of Head To End Of Third Diameter
4.018 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.016 inches first hole -
Externally Relieved Body Diameter Quantity
3 -
Material
Steel comp 4140 -
Material Specification
Ams 6382 assn standard single material response -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-696-2684 MPN 340-3190112-1Observ Cushion Assy
- 1560-00-817-6930 MPN 340-1810002-807Wing Landing Flap
- 1560-01-406-3444 MPN 173758-15Aircraft Strut
- 1560-01-478-5915 MPN 2107429Aileron
- 1560-01-386-2799 MPN 13458186Outer Wing Section
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-00-309-1453 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
528034 | Goodrich Corp |
528034 | Bae Systems Information And |
528034 | Jay-dee Aircraft Supply Co. Inc. |
528034 | General Dynamics Corp |
528034 | Tracor Flight Systems Inc |
528034 | Hughes Missile Systems Co |