NSN 5306-00-323-5220
Wheel Bolt
Between 7.428 inches and 7.448 inches fastener length, hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.493 inches and 0.502 inches .
Manufacturer part number 6712665 for national stock number 5306003235220.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-323-5220.
-
MPN or Model
6712665
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.708 inches -
Fastener Length
Between 7.428 inches and 7.448 inches -
Head Style
Hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.493 inches and 0.502 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.312 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-254-8114 MPN 1998754Terminal Board
- 5905-00-577-9796 MPN 7900018-503Nonprecision Wire Wound Variable Resistor
- 5975-00-729-1651 MPN 6816268-8Electrical Conduit Ferrule
- 5935-00-828-3866 MPN 8597669-040AElectrical Receptacle Connector
- 5945-01-014-6698 MPN 7040316Solenoid Assembly
- 5305-00-010-2705 MPN 102705Setscrew
- 5305-00-012-4161 MPN 124161Hexagon Head Cap Screw
- 5305-00-018-1370 MPN 181370Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-323-5220 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6712665 | Rolls-royce Corporation |
6712665 | General Motors Corp |
6712665 | Allison Transmission, Inc. |