NSN 5306-00-332-4561
Close Tolerance Hex Head Bolt
Between 3.037 inches and 3.067 inches fastener length, double hexagon w/hole head style, between 0.701 inches and 0.721 inches head height, width between flats: between 0.803 inches and 0.814 inches .
Manufacturer part number ST3M571-12-32 for national stock number 5306003324561.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-332-4561.
-
MPN or Model
ST3M571-12-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.027 inches and 1.077 inches -
Fastener Length
Between 3.037 inches and 3.067 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.701 inches and 0.721 inches -
Width Between Flats
Between 0.803 inches and 0.814 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
Between 0.168 inches and 0.188 inches -
Grip Diameter
Between 0.7485 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-105-7221 MPN 3M926-4L13Close Tolerance Screw
- 5305-01-111-4201 MPN BACB30LU3P2Close Tolerance Screw
- 5305-01-207-0224 MPN BACB30NN3K7Close Tolerance Screw
- 5305-01-444-2398 MPN ST3M652C4-9AClose Tolerance Screw
- 5305-01-452-6111 MPN LD111-0046-2419Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-00-514-7744 MPN VEP220555-7-26Machine Bolt
- 5306-00-925-9698 MPN MS21250-06006Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-332-4561 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M571-12-32 | Boeing Company, The |
BM3326-12-32 | Huck International, Inc. |
S371-12-32 | Huck International, Inc. |
VS3060-12-32 | Arconic Global Fasteners & Rings, |
ST3M571-12-32 | Sps Technologies, Llc |
ST3M571-12-32 | Valley-todeco, Inc. |
ST3M571-12-32 | Sps Technologies, Llc |
ST3M571-12-32 | Hi-shear Corporation |
ST3M571-12-32 | Sps Technologies, Llc |
ST3M571-12-32 | Alcoa Global Fasteners, Inc. |
ST3M571-12-32 | Lisi Aerospace Canada Corp |
74328-12-32 | Sps Technologies Inc |
BM3326-12-32 | Huck Intl Inc |
S371-12-32 | Huck Intl Inc |
AIC752-12-32 | Sps Technologies, Llc |
S11-1059-12-32 | Sonic Industries Inc. |
VAL23033-12-32 | Valley-todeco, Inc. |
74328-12-32 | Sps Technologies, Llc |
MB84-12-32 | Hi-shear Corporation |
VS3060-12-32 | Alcoa Global Fasteners, Inc. |
Stock Check
- NE: 2