NSN 5306-00-338-4104
Coaxial Connector
Between 2.358 inches and 2.405 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number EWSB26-8A29 for national stock number 5306003384104.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-338-4104.
-
MPN or Model
EWSB26-8A29
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.536 inches and 0.603 inches -
Fastener Length
Between 2.358 inches and 2.405 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6845 assn standard single material response or sps-m-107, fscm 26512 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type 1, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5143 MPN ST3M455-4L4-1Close Tolerance Screw
- 5305-00-944-6132 MPN 537596Machine Screw
- 5305-01-591-0080 MPN ST3M557-10-10Close Tolerance Screw
- 5306-00-735-8053 MPN 6824018-16Machine Bolt
- 5306-00-765-2969 MPN VAL21013-12028Shear Bolt
- 5306-01-065-6308 MPN VCG0009-8-26Close Tolerance Bolt
- 5306-01-133-4846 MPN VEP220121-4V11Shear Bolt
- 5306-01-332-3131 MPN VAL23001-4D024Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-338-4104 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB26-8A29 | Sps Technologies, Llc |
VS2106-8-29 | Alcoa Global Fasteners, Inc. |
GB511C8-29 | Northrop Grumman Systems Corporation |
GB511C-8-29 | Sps Technologies, Llc |
GB511C-8-29 | Valley-todeco, Inc. |
GB511C-8-29 | J M Precision Inc |
GB511C-8-29 | Huck Intl Inc |
EWSB26-8A29 | Sps Technologies Inc |
GB511C-8-29 | Huck International, Inc. |