NSN 5306-00-343-2739
Coaxial Connector
Between 2.766 inches and 2.796 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 68486-4-036 for national stock number 5306003432739.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-343-2739.
-
MPN or Model
68486-4-036
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 2.766 inches and 2.796 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-142-7197 MPN 11901-4D28Shoulder Screw
- 5305-01-142-9918 MPN 11879C5-18AShoulder Screw
- 5305-01-465-2425 MPN 11827D4-10AFClose Tolerance Screw
- 5305-01-476-9124 MPN 11827V4-3AClose Tolerance Screw
- 5305-01-512-8373 MPN 11825C5-16AClose Tolerance Screw
- 5306-01-334-3611 MPN 11695A07U020Shear Bolt
- 5306-01-493-5544 MPN 11829L4-10FClose Tolerance Bolt
- 5320-00-929-6492 MPN TL110-4-14Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-343-2739 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68486-4-036 | Sps Technologies, Llc |
STSBG002A04U036 | Lockheed Martin Corporation |
11695A04U036 | Reid Products Inc. |